Comparing Pier and Beam Home Foundations

Comparing Pier and Beam Home Foundations

When it comes to choosing the right foundation for a home, homeowners and builders often find themselves weighing the pros and cons of various types. Soil stabilization ensures a strong foundation and prevents further shifting home foundation repair service roadblock. Among the options, pier and beam foundations stand out as a popular choice, especially in certain regions and for specific types of homes. Understanding the nuances of pier and beam foundations, and comparing them with other types, can help in making an informed decision that suits both the structure of the home and the local environmental conditions.


Pier and beam foundations, also known as post and beam or crawl space foundations, consist of a series of piers, typically made of concrete, that are embedded into the ground. These piers support a series of beams, which in turn hold up the floor joists and the rest of the home. This type of foundation creates a raised structure, often with a crawl space between the ground and the bottom of the house. This space can be used for storage, plumbing, and electrical systems, and it also allows for easier access for maintenance and repairs.


One of the primary advantages of pier and beam foundations is their adaptability to different soil types and conditions. In areas prone to expansive soils, which swell and shrink with moisture changes, pier and beam foundations can be more forgiving than slab foundations. The raised structure allows the home to shift slightly without causing significant damage, whereas a slab might crack under similar conditions. This flexibility makes pier and beam foundations particularly popular in regions like Texas, where the soil can be quite challenging.


Another benefit of pier and beam foundations is their potential for better insulation and ventilation. The crawl space can be insulated, which can contribute to a more energy-efficient home. Additionally, the space allows for better air circulation, which can help in reducing moisture-related issues like mold and mildew. This is a significant advantage over slab foundations, which can sometimes lead to moisture problems if not properly sealed and insulated.


However, pier and beam foundations do come with their own set of challenges. The crawl space can be a haven for pests if not properly sealed and maintained. It also requires more maintenance than a slab foundation, as the piers and beams need to be inspected regularly for signs of settling, shifting, or damage. Additionally, the initial cost of constructing a pier and beam foundation can be higher than that of a slab foundation, although the long-term benefits might outweigh these costs in certain situations.


When comparing pier and beam foundations to other types, such as slab or basement foundations, it's essential to consider the specific needs of the home and the local environment. For instance, in areas prone to flooding, a pier and beam foundation might be preferable, as it allows the home to be elevated above potential flood levels. On the other hand, in colder climates, a basement foundation might be more suitable, as it can provide additional living space and better insulation.


In conclusion, pier and beam foundations offer a versatile and adaptable option for home construction, particularly in regions with challenging soil conditions. While they may require more maintenance and have a higher initial cost, the benefits of flexibility, potential energy efficiency, and better ventilation can make them a worthwhile choice for many homeowners. As with any significant decision in home building, it's crucial to weigh the pros and cons of pier and beam foundations against other options and consider the specific needs of the home and the local environment before making a final decision.



 

Boston's Big Dig presented geotechnical challenges in an urban environment.
Precast concrete retaining wall
A typical cross-section of a slope used in two-dimensional analyzes.

Geotechnical engineering, also known as geotechnics, is the branch of civil engineering concerned with the engineering behavior of earth materials. It uses the principles of soil mechanics and rock mechanics to solve its engineering problems. It also relies on knowledge of geology, hydrology, geophysics, and other related sciences.

Geotechnical engineering has applications in military engineering, mining engineering, petroleum engineering, coastal engineering, and offshore construction. The fields of geotechnical engineering and engineering geology have overlapping knowledge areas. However, while geotechnical engineering is a specialty of civil engineering, engineering geology is a specialty of geology.

History

[edit]

Humans have historically used soil as a material for flood control, irrigation purposes, burial sites, building foundations, and construction materials for buildings. Dykes, dams, and canals dating back to at least 2000 BCE—found in parts of ancient Egypt, ancient Mesopotamia, the Fertile Crescent, and the early settlements of Mohenjo Daro and Harappa in the Indus valley—provide evidence for early activities linked to irrigation and flood control. As cities expanded, structures were erected and supported by formalized foundations. The ancient Greeks notably constructed pad footings and strip-and-raft foundations. Until the 18th century, however, no theoretical basis for soil design had been developed, and the discipline was more of an art than a science, relying on experience.[1]

Several foundation-related engineering problems, such as the Leaning Tower of Pisa, prompted scientists to begin taking a more scientific-based approach to examining the subsurface. The earliest advances occurred in the development of earth pressure theories for the construction of retaining walls. Henri Gautier, a French royal engineer, recognized the "natural slope" of different soils in 1717, an idea later known as the soil's angle of repose. Around the same time, a rudimentary soil classification system was also developed based on a material's unit weight, which is no longer considered a good indication of soil type.[1][2]

The application of the principles of mechanics to soils was documented as early as 1773 when Charles Coulomb, a physicist and engineer, developed improved methods to determine the earth pressures against military ramparts. Coulomb observed that, at failure, a distinct slip plane would form behind a sliding retaining wall and suggested that the maximum shear stress on the slip plane, for design purposes, was the sum of the soil cohesion, , and friction , where is the normal stress on the slip plane and is the friction angle of the soil. By combining Coulomb's theory with Christian Otto Mohr's 2D stress state, the theory became known as Mohr-Coulomb theory. Although it is now recognized that precise determination of cohesion is impossible because is not a fundamental soil property, the Mohr-Coulomb theory is still used in practice today.[3]

In the 19th century, Henry Darcy developed what is now known as Darcy's Law, describing the flow of fluids in a porous media. Joseph Boussinesq, a mathematician and physicist, developed theories of stress distribution in elastic solids that proved useful for estimating stresses at depth in the ground. William Rankine, an engineer and physicist, developed an alternative to Coulomb's earth pressure theory. Albert Atterberg developed the clay consistency indices that are still used today for soil classification.[1][2] In 1885, Osborne Reynolds recognized that shearing causes volumetric dilation of dense materials and contraction of loose granular materials.

Modern geotechnical engineering is said to have begun in 1925 with the publication of Erdbaumechanik by Karl von Terzaghi, a mechanical engineer and geologist. Considered by many to be the father of modern soil mechanics and geotechnical engineering, Terzaghi developed the principle of effective stress, and demonstrated that the shear strength of soil is controlled by effective stress.[4] Terzaghi also developed the framework for theories of bearing capacity of foundations, and the theory for prediction of the rate of settlement of clay layers due to consolidation.[1][3][5] Afterwards, Maurice Biot fully developed the three-dimensional soil consolidation theory, extending the one-dimensional model previously developed by Terzaghi to more general hypotheses and introducing the set of basic equations of Poroelasticity.

In his 1948 book, Donald Taylor recognized that the interlocking and dilation of densely packed particles contributed to the peak strength of the soil. Roscoe, Schofield, and Wroth, with the publication of On the Yielding of Soils in 1958, established the interrelationships between the volume change behavior (dilation, contraction, and consolidation) and shearing behavior with the theory of plasticity using critical state soil mechanics. Critical state soil mechanics is the basis for many contemporary advanced constitutive models describing the behavior of soil.[6]

In 1960, Alec Skempton carried out an extensive review of the available formulations and experimental data in the literature about the effective stress validity in soil, concrete, and rock in order to reject some of these expressions, as well as clarify what expressions were appropriate according to several working hypotheses, such as stress-strain or strength behavior, saturated or non-saturated media, and rock, concrete or soil behavior.

Roles

[edit]

Geotechnical investigation

[edit]
Main article: Geotechnical investigation

Geotechnical engineers investigate and determine the properties of subsurface conditions and materials. They also design corresponding earthworks and retaining structures, tunnels, and structure foundations, and may supervise and evaluate sites, which may further involve site monitoring as well as the risk assessment and mitigation of natural hazards.[7][8]

Geotechnical engineers and engineering geologists perform geotechnical investigations to obtain information on the physical properties of soil and rock underlying and adjacent to a site to design earthworks and foundations for proposed structures and for the repair of distress to earthworks and structures caused by subsurface conditions. Geotechnical investigations involve surface and subsurface exploration of a site, often including subsurface sampling and laboratory testing of retrieved soil samples. Sometimes, geophysical methods are also used to obtain data, which include measurement of seismic waves (pressure, shear, and Rayleigh waves), surface-wave methods and downhole methods, and electromagnetic surveys (magnetometer, resistivity, and ground-penetrating radar). Electrical tomography can be used to survey soil and rock properties and existing underground infrastructure in construction projects.[9]

Surface exploration can include on-foot surveys, geologic mapping, geophysical methods, and photogrammetry. Geologic mapping and interpretation of geomorphology are typically completed in consultation with a geologist or engineering geologist. Subsurface exploration usually involves in-situ testing (for example, the standard penetration test and cone penetration test). The digging of test pits and trenching (particularly for locating faults and slide planes) may also be used to learn about soil conditions at depth. Large-diameter borings are rarely used due to safety concerns and expense. Still, they are sometimes used to allow a geologist or engineer to be lowered into the borehole for direct visual and manual examination of the soil and rock stratigraphy.

Various soil samplers exist to meet the needs of different engineering projects. The standard penetration test, which uses a thick-walled split spoon sampler, is the most common way to collect disturbed samples. Piston samplers, employing a thin-walled tube, are most commonly used to collect less disturbed samples. More advanced methods, such as the Sherbrooke block sampler, are superior but expensive. Coring frozen ground provides high-quality undisturbed samples from ground conditions, such as fill, sand, moraine, and rock fracture zones.[10]

Geotechnical centrifuge modeling is another method of testing physical-scale models of geotechnical problems. The use of a centrifuge enhances the similarity of the scale model tests involving soil because soil's strength and stiffness are susceptible to the confining pressure. The centrifugal acceleration allows a researcher to obtain large (prototype-scale) stresses in small physical models.

Foundation design

[edit]
Main article: Foundation (engineering)

The foundation of a structure's infrastructure transmits loads from the structure to the earth. Geotechnical engineers design foundations based on the load characteristics of the structure and the properties of the soils and bedrock at the site. Generally, geotechnical engineers first estimate the magnitude and location of loads to be supported before developing an investigation plan to explore the subsurface and determine the necessary soil parameters through field and lab testing. Following this, they may begin the design of an engineering foundation. The primary considerations for a geotechnical engineer in foundation design are bearing capacity, settlement, and ground movement beneath the foundations.[11]

Earthworks

[edit]
A compactor/roller operated by U.S. Navy Seabees
See also: Earthworks (engineering)

Geotechnical engineers are also involved in the planning and execution of earthworks, which include ground improvement,[11] slope stabilization, and slope stability analysis.

Ground improvement

[edit]

Various geotechnical engineering methods can be used for ground improvement, including reinforcement geosynthetics such as geocells and geogrids, which disperse loads over a larger area, increasing the soil's load-bearing capacity. Through these methods, geotechnical engineers can reduce direct and long-term costs.[12]

Slope stabilization

[edit]
Simple slope slip section.
Main article: Slope stability

Geotechnical engineers can analyze and improve slope stability using engineering methods. Slope stability is determined by the balance of shear stress and shear strength. A previously stable slope may be initially affected by various factors, making it unstable. Nonetheless, geotechnical engineers can design and implement engineered slopes to increase stability.

Slope stability analysis
[edit]
Main article: Slope stability analysis

Stability analysis is needed to design engineered slopes and estimate the risk of slope failure in natural or designed slopes by determining the conditions under which the topmost mass of soil will slip relative to the base of soil and lead to slope failure.[13] If the interface between the mass and the base of a slope has a complex geometry, slope stability analysis is difficult and numerical solution methods are required. Typically, the interface's exact geometry is unknown, and a simplified interface geometry is assumed. Finite slopes require three-dimensional models to be analyzed, so most slopes are analyzed assuming that they are infinitely wide and can be represented by two-dimensional models.

Sub-disciplines

[edit]

Geosynthetics

[edit]
Main article: Geosynthetics
A collage of geosynthetic products.

Geosynthetics are a type of plastic polymer products used in geotechnical engineering that improve engineering performance while reducing costs. This includes geotextiles, geogrids, geomembranes, geocells, and geocomposites. The synthetic nature of the products make them suitable for use in the ground where high levels of durability are required. Their main functions include drainage, filtration, reinforcement, separation, and containment.

Geosynthetics are available in a wide range of forms and materials, each to suit a slightly different end-use, although they are frequently used together. Some reinforcement geosynthetics, such as geogrids and more recently, cellular confinement systems, have shown to improve bearing capacity, modulus factors and soil stiffness and strength.[14] These products have a wide range of applications and are currently used in many civil and geotechnical engineering applications including roads, airfields, railroads, embankments, piled embankments, retaining structures, reservoirs, canals, dams, landfills, bank protection and coastal engineering.[15]

Offshore

[edit]
Main article: Offshore geotechnical engineering
Platforms offshore Mexico.

Offshore (or marine) geotechnical engineering is concerned with foundation design for human-made structures in the sea, away from the coastline (in opposition to onshore or nearshore engineering). Oil platforms, artificial islands and submarine pipelines are examples of such structures.[16]

There are a number of significant differences between onshore and offshore geotechnical engineering.[16][17] Notably, site investigation and ground improvement on the seabed are more expensive; the offshore structures are exposed to a wider range of geohazards; and the environmental and financial consequences are higher in case of failure. Offshore structures are exposed to various environmental loads, notably wind, waves and currents. These phenomena may affect the integrity or the serviceability of the structure and its foundation during its operational lifespan and need to be taken into account in offshore design.

In subsea geotechnical engineering, seabed materials are considered a two-phase material composed of rock or mineral particles and water.[18][19] Structures may be fixed in place in the seabed—as is the case for piers, jetties and fixed-bottom wind turbines—or may comprise a floating structure that remains roughly fixed relative to its geotechnical anchor point. Undersea mooring of human-engineered floating structures include a large number of offshore oil and gas platforms and, since 2008, a few floating wind turbines. Two common types of engineered design for anchoring floating structures include tension-leg and catenary loose mooring systems.[20]

Observational method

[edit]

First proposed by Karl Terzaghi and later discussed in a paper by Ralph B. Peck, the observational method is a managed process of construction control, monitoring, and review, which enables modifications to be incorporated during and after construction. The method aims to achieve a greater overall economy without compromising safety by creating designs based on the most probable conditions rather than the most unfavorable.[21] Using the observational method, gaps in available information are filled by measurements and investigation, which aid in assessing the behavior of the structure during construction, which in turn can be modified per the findings. The method was described by Peck as "learn-as-you-go".[22]

The observational method may be described as follows:[22]

  1. General exploration sufficient to establish the rough nature, pattern, and properties of deposits.
  2. Assessment of the most probable conditions and the most unfavorable conceivable deviations.
  3. Creating the design based on a working hypothesis of behavior anticipated under the most probable conditions.
  4. Selection of quantities to be observed as construction proceeds and calculating their anticipated values based on the working hypothesis under the most unfavorable conditions.
  5. Selection, in advance, of a course of action or design modification for every foreseeable significant deviation of the observational findings from those predicted.
  6. Measurement of quantities and evaluation of actual conditions.
  7. Design modification per actual conditions

The observational method is suitable for construction that has already begun when an unexpected development occurs or when a failure or accident looms or has already happened. It is unsuitable for projects whose design cannot be altered during construction.[22]

See also

[edit]
  • Civil engineering
  • Deep Foundations Institute
  • Earthquake engineering
  • Earth structure
  • Effective stress
  • Engineering geology
  • Geological Engineering
  • Geoprofessions
  • Hydrogeology
  • International Society for Soil Mechanics and Geotechnical Engineering
  • Karl von Terzaghi
  • Land reclamation
  • Landfill
  • Mechanically stabilized earth
  • Offshore geotechnical engineering
  • Rock mass classifications
  • Sediment control
  • Seismology
  • Soil mechanics
  • Soil physics
  • Soil science

 

Notes

[edit]
  1. ^ a b c d Das, Braja (2006). Principles of Geotechnical Engineering. Thomson Learning.
  2. ^ a b Budhu, Muni (2007). Soil Mechanics and Foundations. John Wiley & Sons, Inc. ISBN 978-0-471-43117-6.
  3. ^ a b Disturbed soil properties and geotechnical design, Schofield, Andrew N., Thomas Telford, 2006. ISBN 0-7277-2982-9
  4. ^ Guerriero V., Mazzoli S. (2021). "Theory of Effective Stress in Soil and Rock and Implications for Fracturing Processes: A Review". Geosciences. 11 (3): 119. Bibcode:2021Geosc..11..119G. doi:10.3390/geosciences11030119.
  5. ^ Soil Mechanics, Lambe, T.William and Whitman, Robert V., Massachusetts Institute of Technology, John Wiley & Sons., 1969. ISBN 0-471-51192-7
  6. ^ Soil Behavior and Critical State Soil Mechanics, Wood, David Muir, Cambridge University Press, 1990. ISBN 0-521-33782-8
  7. ^ Terzaghi, K., Peck, R.B. and Mesri, G. (1996), Soil Mechanics in Engineering Practice 3rd Ed., John Wiley & Sons, Inc. ISBN 0-471-08658-4
  8. ^ Holtz, R. and Kovacs, W. (1981), An Introduction to Geotechnical Engineering, Prentice-Hall, Inc. ISBN 0-13-484394-0
  9. ^ Deep Scan Tech (2023): Deep Scan Tech uncovers hidden structures at the site of Denmark's tallest building.
  10. ^ "Geofrost Coring". GEOFROST. Retrieved 20 November 2020.
  11. ^ a b Han, Jie (2015). Principles and Practice of Ground Improvement. Wiley. ISBN 9781118421307.
  12. ^ RAJU, V. R. (2010). Ground Improvement Technologies and Case Histories. Singapore: Research Publishing Services. p. 809. ISBN 978-981-08-3124-0. Ground Improvement – Principles And Applications In Asia.
  13. ^ Pariseau, William G. (2011). Design analysis in rock mechanics. CRC Press.
  14. ^ Hegde, A.M. and Palsule P.S. (2020), Performance of Geosynthetics Reinforced Subgrade Subjected to Repeated Vehicle Loads: Experimental and Numerical Studies. Front. Built Environ. 6:15. https://www.frontiersin.org/articles/10.3389/fbuil.2020.00015/full.
  15. ^ Koerner, Robert M. (2012). Designing with Geosynthetics (6th Edition, Vol. 1 ed.). Xlibris. ISBN 9781462882892.
  16. ^ a b Dean, E.T.R. (2010). Offshore Geotechnical Engineering – Principles and Practice. Thomas Telford, Reston, VA, 520 p.
  17. ^ Randolph, M. and Gourvenec, S., 2011. Offshore geotechnical engineering. Spon Press, N.Y., 550 p.
  18. ^ Das, B.M., 2010. Principles of geotechnical engineering. Cengage Learning, Stamford, 666 p.
  19. ^ Atkinson, J., 2007. The mechanics of soils and foundations. Taylor & Francis, N.Y., 442 p.
  20. ^ Floating Offshore Wind Turbines: Responses in a Sea state – Pareto Optimal Designs and Economic Assessment, P. Sclavounos et al., October 2007.
  21. ^ Nicholson, D, Tse, C and Penny, C. (1999). The Observational Method in ground engineering – principles and applications. Report 185, CIRIA, London.
  22. ^ a b c Peck, R.B (1969). Advantages and limitations of the observational method in applied soil mechanics, Geotechnique, 19, No. 1, pp. 171-187.

References

[edit]
  • Bates and Jackson, 1980, Glossary of Geology: American Geological Institute.
  • Krynine and Judd, 1957, Principles of Engineering Geology and Geotechnics: McGraw-Hill, New York.
  • Ventura, Pierfranco, 2019, Fondazioni, Volume 1, Modellazioni statiche e sismiche, Hoepli, Milano
[edit]
  • Worldwide Geotechnical Literature Database
 
 
 
 

 

Look up foundation or foundations in Wiktionary, the free dictionary.

Foundation(s) or The Foundation(s) may refer to:

Common uses

[edit]
  • Foundation (cosmetics), a skin-coloured makeup cream applied to the face
  • Foundation (engineering), the element of a structure which connects it to the ground, and transfers loads from the structure to the ground
  • Foundation (evidence), a legal term
  • Foundation (nonprofit), a type of charitable organization
    • Foundation (United States law), a type of charitable organization in the U.S.
    • Private foundation, a charitable organization that might not qualify as a public charity by government standards

Arts, entertainment, and media

[edit]

Film and TV

[edit]
  • The Foundation, a film about 1960s-1970s Aboriginal history in Sydney, featuring Gary Foley
  • The Foundation (1984 TV series), a Hong Kong series
  • The Foundation (Canadian TV series), a 2009–2010 Canadian sitcom
  • "The Foundation" (Seinfeld), an episode
  • Foundation (TV series), an Apple TV+ series adapted from Isaac Asimov's novels

Games

[edit]
  • Foundation (video game), a city-building game (2025)
  • Foundation, an Amiga video game
  • The Foundation, a character in 2017 game Fortnite Battle Royale

Literature

[edit]
  • Foundation (book series), a series of science fiction books by Isaac Asimov
    • Foundation (Asimov novel), the first book in Asimov's series, published in 1951
  • Foundation (b-boy book), by Joseph G. Schloss
  • Foundation (Lackey novel), a 2008 fantasy novel by Mercedes Lackey

Music

[edit]
  • The Foundations, a British soul group
  • Foundations (EP), by Serj Tankian

Albums

[edit]
  • Foundation (Brand Nubian album)
  • Foundation (Breakage album)
  • Foundation (Doc Watson album)
  • Foundation (Magnum album)
  • Foundation (M.O.P. album)
  • Foundation, a 1997 compilation album by Die Krupps
  • The Foundation (Geto Boys album)
  • The Foundation (Pep Love album), 2005
  • The Foundation (Zac Brown Band album)
  • The Foundations (album), by 4 Corners

Songs

[edit]
  • "Foundation", a 1983 song by Spandau Ballet from the album True
  • "Foundation", a 1998 song by Brand Nubian from the eponymous album Foundation
  • "Foundation", a 2009 song by M.O.P. from the eponymous album Foundation
  • "Foundation", a 2010 song by Breakage from the eponymous album Foundation
  • "Foundation", a 2015 song by Years & Years from Communion
  • "Foundations" (song), by Kate Nash
  • "The Foundation" (song), by Xzibit

Other uses in arts, entertainment, and media

[edit]
  • Foundation – The International Review of Science Fiction, a literary journal
  • The Foundation Trilogy (BBC Radio), a radio adaption of Asimov's series
  • The SCP Foundation, a fictional organization that is often referred to in-universe as "The Foundation"

Education

[edit]
  • Foundation degree, a British academic qualification
  • Foundation school, a type of school in England and Wales
  • Foundation Stage, a stage of education for children aged 3 to 5 in England
  • University Foundation Programme, a British university entrance course

Science and technology

[edit]
  • Foundation (framework), a free collection of tools for creating websites and web applications by ZURB
  • Foundation Fieldbus, a communications system
  • Foundation Kit, an Apple API

Companies

[edit]
  • Foundation Medicine, a genomic profiling company

See also

[edit]
  • All pages with titles beginning with Foundation
  • All pages with titles beginning with The Foundation
  • Foundations of mathematics, theory of mathematics
Photo
Photo
Photo
Photo

Things To Do in Cook County

Photo

Sand Ridge Nature Center

4.8 (96)
Photo

River Trail Nature Center

4.6 (235)
Photo

Palmisano (Henry) Park

4.7 (1262)

Driving Directions in Cook County

Driving Directions From Palmisano (Henry) Park to
Driving Directions From Lake Katherine Nature Center and Botanic Gardens to
Driving Directions From Navy Pier to

https://www.google.com/maps/dir/Navy+Pier/United+Structural+Systems+of+Illinois%2C+Inc/@41.8918633,-87.6050944,14z/data=!3m1!4b1!4m14!4m13!1m5!1m1!1sunknown!2m2!1d-87.6050944!2d41.8918633!1m5!1m1!1sChIJ-wSxDtinD4gRiv4kY3RRh9U!2m2!1d-88.1396465!2d42.0637725!3e0

https://www.google.com/maps/dir/Lake+Katherine+Nature+Center+and+Botanic+Gardens/United+Structural+Systems+of+Illinois%2C+Inc/@41.6776048,-87.8010774,14z/data=!3m1!4b1!4m14!4m13!1m5!1m1!1sunknown!2m2!1d-87.8010774!2d41.6776048!1m5!1m1!1sChIJ-wSxDtinD4gRiv4kY3RRh9U!2m2!1d-88.1396465!2d42.0637725!3e2

https://www.google.com/maps/dir/Palmisano+%28Henry%29+Park/United+Structural+Systems+of+Illinois%2C+Inc/@41.8429903,-87.6490151,14z/data=!3m1!4b1!4m14!4m13!1m5!1m1!1sunknown!2m2!1d-87.6490151!2d41.8429903!1m5!1m1!1sChIJ-wSxDtinD4gRiv4kY3RRh9U!2m2!1d-88.1396465!2d42.0637725!3e1

Reviews for

Jeffery James

(5)

Very happy with my experience. They were prompt and followed through, and very helpful in fixing the crack in my foundation.

Sarah McNeily

(5)

USS was excellent. They are honest, straightforward, trustworthy, and conscientious. They thoughtfully removed the flowers and flower bulbs to dig where they needed in the yard, replanted said flowers and spread the extra dirt to fill in an area of the yard. We've had other services from different companies and our yard was really a mess after. They kept the job site meticulously clean. The crew was on time and friendly. I'd recommend them any day! Thanks to Jessie and crew.

Jim de Leon

(5)

It was a pleasure to work with Rick and his crew. From the beginning, Rick listened to my concerns and what I wished to accomplish. Out of the 6 contractors that quoted the project, Rick seemed the MOST willing to accommodate my wishes. His pricing was definitely more than fair as well. I had 10 push piers installed to stabilize and lift an addition of my house. The project commenced at the date that Rick had disclosed initially and it was completed within the same time period expected (based on Rick's original assessment). The crew was well informed, courteous, and hard working. They were not loud (even while equipment was being utilized) and were well spoken. My neighbors were very impressed on how polite they were when they entered / exited my property (saying hello or good morning each day when they crossed paths). You can tell they care about the customer concerns. They ensured that the property would be put back as clean as possible by placing MANY sheets of plywood down prior to excavating. They compacted the dirt back in the holes extremely well to avoid large stock piles of soils. All the while, the main office was calling me to discuss updates and expectations of completion. They provided waivers of lien, certificates of insurance, properly acquired permits, and JULIE locates. From a construction background, I can tell you that I did not see any flaws in the way they operated and this an extremely professional company. The pictures attached show the push piers added to the foundation (pictures 1, 2 & 3), the amount of excavation (picture 4), and the restoration after dirt was placed back in the pits and compacted (pictures 5, 6 & 7). Please notice that they also sealed two large cracks and steel plated these cracks from expanding further (which you can see under my sliding glass door). I, as well as my wife, are extremely happy that we chose United Structural Systems for our contractor. I would happily tell any of my friends and family to use this contractor should the opportunity arise!

Chris Abplanalp

(5)

USS did an amazing job on my underpinning on my house, they were also very courteous to the proximity of my property line next to my neighbor. They kept things in order with all the dirt/mud they had to excavate. They were done exactly in the timeframe they indicated, and the contract was very details oriented with drawings of what would be done. Only thing that would have been nice, is they left my concrete a little muddy with boot prints but again, all-in-all a great job

Dave Kari

(5)

What a fantastic experience! Owner Rick Thomas is a trustworthy professional. Nick and the crew are hard working, knowledgeable and experienced. I interviewed every company in the area, big and small. A homeowner never wants to hear that they have foundation issues. Out of every company, I trusted USS the most, and it paid off in the end. Highly recommend.

View GBP

Check our other pages :

Frequently Asked Questions

Pier and beam foundations consist of piers supporting beams that elevate the home off the ground, allowing for crawl space. Slab foundations are a single, solid concrete slab poured directly onto the ground. Pier and beam foundations are generally more flexible and easier to repair, while slab foundations are more cost-effective and simpler to construct.
Common issues include sagging or uneven floors due to settling piers, moisture-related problems like mold and rot in the crawl space, and pest infestations. These can lead to structural instability and require foundation repair services.
Repairing pier and beam foundations often involves adjusting or replacing piers, addressing moisture issues in the crawl space, and reinforcing beams. Slab foundation repairs typically involve lifting and leveling the slab, filling voids underneath, and sometimes installing piers to stabilize the slab. Pier and beam repairs are generally less invasive but may require more frequent maintenance.
Repairing a pier and beam foundation is usually less expensive than a full replacement, with costs depending on the extent of damage and required repairs. Replacement involves demolishing the existing foundation and building a new one, which can be significantly more costly but may be necessary for severe damage or when planning major home renovations.
To prevent future issues, ensure proper drainage around your home to keep the crawl space dry, regularly inspect and maintain the foundation for signs of damage or pest activity, and consider encapsulation of the crawl space to control moisture and improve energy efficiency. Regular professional inspections can also help catch and address problems early.